The garage door is your home's largest door and has the biggest moving parts also. If it stops working you will have one large part to replace and it can be a huge hassle. Therefore, it is very important to properly maintain it. Here are some useful tips for properly maintaining your garage door.
1. Pay Close Attention
One of the best ways to properly care for your garage door is just to stay alert and pay close attention to it. Whenever you either open or close the door, make sure it is functioning smoothly. There shouldn't be any jerking and very little noise, especially no scraping or grinding.
2. Tighten The Hardware
A garage door on average gets used more than 1,000 times per year. This results in lots of vibration that works to loosen everything from the roller brackets to the bolts. Just take a socket wrench and tighten everything so that it keeps working properly and without any problems.
3. Test The Balance On The Door
If a garage door is not balanced, it will probably not work correctly. Eventually the door can end up breaking due all of the stress placed on its opener. In order to check the door's balance, pull on the red cord or release handle and then move the door up halfway manually. If the door doesn't stay in position, then there is something wrong with the balance and you will need to have a professional look at it.
4. Replace Any Rollers That Are Broken
Inspect the rollers at least two times per year to make sure they aren't damaged or worn down. You will need to replace them, on average, once per seven years.
5. Check The Weatherstripping
There is weatherstripping the runs across the bottom of the garage door. This makes a secure seal when the door is shut. Check the weatherstripping on a regular basis and check for any broken, cracked or brittle parts. Replace as needed.
6. Apply Lubrication
To keep your garage door lubricated properly and working smoothly, use some white lithium grease on the screw or chain on the opener and lubrication spray on the overhead springs.
7. Inspect The Cables
Check the bottom roller bracket to ensure it is intact and is working properly.
8. Test The Safety Measures
Check the photocell component by shutting the door, and put your foot through its invisible beam while it is closing. It should trip the system and door should be move up again.
9. Clear the Tracks Out
Clear out any debris as necessary.
10. Clean Garage Door
Clean your garage door and check it on a regular basis for any peeling paint, warps or chips.
Does your garage door need a tune-up or repair and you don't have the time or tools to do it? Give us a call today at 401-279-0009